Have a Question? Look here
Found matchmatches
We didn't find any matches. Please try again.
- 1.Make sure the space is windless for the best backflow effect, so you better close the doors and windows while burning.
- 2.Light the tip of the backflow incense cone, and allow the top of it to get glowing hot, blowing out the flame for several seconds.
- 3.Blow out the flame and allow the fragrance to release.
- 4.place the incense cone on top of the waterfall incense burner directly above the hole.
It will take about 30 seconds for the backflow smoke effect to start.
- 5.Ventilate the space and wipe the burner after using it.
- 1.Pour the incense ash into the censer, press it firmly and evenly with the incense, and smooth it out.
- 2. Choose the desired pattern of the incense seal and gently place it on top of the incense ash, pressing the top of the incense seal lightly with your fingers to prevent it from shifting.
- 3. Use an incense spoon to fill the pattern groove of the incense seal with incense powder, pressing firmly with your index finger to fill the groove tightly.
- 4. Use an incense spoon or spatula to remove excess incense powder from the incense seal, then gently tap the edges of the incense seal's pattern.
- 5. Lift the incense seal gently upwards, ensuring a stable grip.
- 6. Light the incense.
- 1.Light the incense stick.
- 2.Use your hand to fan out the flame of the incense stick (Do not blow it out with your mouth).
- 3Insert the incense stick into the censer.
- 1.Light the Incense Coil.
- 2.Use your hand to fan out the flame of the Incense Coil (Do not blow it out with your mouth).
- 3.Place the Incense Coil in the censer.
- 1.Light the Incense Sheets.
- 2.Use your hand to fan out the flame of the Incense Sheets (Do not blow it out with your mouth).
- 3.Place the Incense Sheets on the fire-resistant mat.
- 4.Put it inside the censer.